J's Racing 00-09 Honda S2000 S2 Front Ball Joints (Offset) Brand_PRL Motorsports Over time heat from the

Over time heat from the F20C/F22C causes the plastic housing around the knock sensor to become brittle and break

functional GReddy three tip configuration

AAAll grounds are protected with DR-25 high temp shrink

Release Bearing 22810-PCY-003

It’s simple

J's Racing 00-09 Honda S2000 S2 Front Ball Joints (Offset) Brand_PRL Motorsports Over time heat from theNewly designed Js Racing Camber Joint CAJ S1 S2 By redesigning the previous model, the new camber joints have been enhanced with the roll center adjuster function in addition to the original negative camber adjustment. Material : Forged aluminum 6061 The surface is anodized red with a laser carved Js Racing seal Ball joint S45C Boll stud SCM435 HB195 260, Fluctuation angle 33 degree all around The front camber angle can be adjusted to the stock + 3