100 Panel Mounted Circuit Controller option-set-067 Accessory decoders receive commands sent

Accessory decoders receive commands sent from the command station via the power station and activate the drives of turnouts or other switching devices

The slight gauge-narrowing to 16

Contains: Badger Model 250 Spray Tool with attached 3/4oz (22ml) jar

Trackmaking tools for standard 16

and with a 6 Pin DCC decoder socket for those wishing to use the models with a DCC system

100 Panel Mounted Circuit Controller option-set-067 Accessory decoders receive commands sentSingle track controller designed to sit inside a control panel. This controller has a rotating dial to control the speed of your locomotive and a DPDT switch to control the direction; you can also switch it to the center position to cut off the power to the track. TECHNICAL DETAILS INPUT 1 x 16v AC (GMC M1, GMC T1 or GMC WM1) Rated at 1. 25 Amps OUTPUT 1 x 12v DC Rated at 1. 25 Amps MEASUREMENTS WIDTH 70mm DEPTH 50mm HEIGHT 105mm GMC 100 Instructions