Rule PWC 500 GPH Automatic Pump [25SA-6WC] Marine Navigation & Instruments | Cameras - Network Video allowing you to adjust depth

allowing you to adjust depth on the go and easily raise the tool for transport

it effortlessly connects to 12V batteries to deliver up to 2500W continuous AC power

or to boost placement of an antenna above on-board obstructions

GPSMAP 1222 chartplotter

Airmar's 9-Pin Mix & Match Chirp Cable for Navico Med and High or Highwide Transducers

Rule PWC 500 GPH Automatic Pump [25SA-6WC] Marine Navigation & Instruments | Cameras - Network Video allowing you to adjust depthPWC 500 GPH Automatic Pump In the next generation sensing bilge pumps, the 500 GPH S Series pump works on the principle of impeller resistance. The pump will turn on every 2 1 2 minutes for about one second to sense for water. If water is present, the pump will sense resistance and continue to run until all water is removed. After that, it will resume checking for water every 2 1 2 minutes. Water is kept in check between 1 8" and 3 8". Improved design