Wireless Remote Control Kit for M4 and M6 adapters/washers two 12 mm bolt axles

two 12 mm bolt axles

superior extended size

2) Unsnap tank from base by compressing/crushing tank sides or cutting slices into tank on each side of the 6 lock tabs

picture 3 shows how to directly connect the 60 inch hose to the pump output by removing the strain relief hose from the barb output

refer to the Battery Condition Based on Voltage Table below:

Wireless Remote Control Kit for M4 and M6 adapters/washers two 12 mm bolt axlesKit includes programmable eprom receiver, two channel transmitter ( unique codes), on off switch, 4 (6mm) copper crimp ferrules, 2 insulated ferrules. Receiver is pre programmed to both transmitter channels ( toggle mode). Receiver rated for 12 volts, 10 amps. Program is retained without batteries. Receiver can be reprogrammed to many unique transmitters. One transmitter can activate multiple receivers. Color coded wires provide easy installation. 20