DENALI Turn Signal Load Resistors to replace original 10 Watt Signals 20 OHM 10W (DNL.WHS.12700) triumph-tiger-800 The connector is pre-assembled with

The connector is pre-assembled with 3 inch 18 AWG wires exiting the connector which can be soldered onto the light or accessory of your choice

These mounts are designed for SW-Motech lights

WE CAN THEN INCLUDE ANY NECESSARY ADAPTERS WHERE POSSIBLE

SLC Side Carrier – Left side x 1

Fitting Difficulty (1-5):  2 - Fairly Easy

DENALI Turn Signal Load Resistors to replace original 10 Watt Signals 20 OHM 10W (DNL.WHS.12700) triumph-tiger-800 The connector is pre-assembled withDENALI Turn Signal Load Resistors to replace original 10 Watt Signals 20 OHM 10W 20 Ohm Load Resistors to replace your original 10 Watt Turn Signals with Denali LED Turn Signals. Product Description Denali brings you the Turn Signal Load Resistors To Replace Original 10 Watt Signals (20 OHM, 10W). Turn load resistors are necessary to prevent hyper flashing of the signals when swapping from incandescent to LED turns signals. Use these 20 Ohm Load