Specialty Products Company 23186 | Camber/Caster Sleeve - 1 1/2° Hammer with Fiberglass Handle Designed to loosen over-torqued

Designed to loosen over-torqued

Required: 1 kit per axle

Xtra Seal 14-008 | Chemical Vulcanizing Tire Repair Cement 8 oz Can

including X-Series

Specialty Products Company Freightliner Shim - 1/32″ (35060)

Specialty Products Company 23186 | Camber/Caster Sleeve - 1 1/2° Hammer with Fiberglass Handle Designed to loosen over-torquedSpecialty Products Company Camber Caster Sleeve 1 1 2(23186) These popular sleeves are widely used to adjust caster and or camber on many Ford and Mazda RWD & 4WD trucks. To install, simply loosen and remove upper ball joint pinch bolt. Remove top snap ring if one is present. Use a sleeve puller (Part #77880 or Part #88830) to remove the existing sleeve. To split camber and caster adjustment, rotate sleeve 45. Save time during alignment, use (Part