Specialty Products Company 23194 | Camber/Caster Sleeve - 3 1/2° scraper The FRU Series of Repair

The FRU Series of Repair Units should be used in conjunction with REMA TIP TOP RS Stem Units

Rema 930 - Wooden handle rigid skiving knife with tapered point tip

26 OR-232-TG Grader 32″

Also intended to cushion the blow between the handle and vehicle's body or door if the handle accidentally falls against the vehicle

The flocked foam pad has soft bristles to ensure over-all coverage in and around raised lettering and grooves

Specialty Products Company 23194 | Camber/Caster Sleeve - 3 1/2° scraper The FRU Series of RepairSpecialty Products Company Camber Caster Sleeve 3 1 2 (23194) These popular sleeves are widely used to adjust caster and or camber on many Ford and Mazda RWD & 4WD trucks. To install, simply loosen and remove upper ball joint pinch bolt. Remove top snap ring if one is present. Use a sleeve puller (Part #77880 or Part #88830) to remove the existing sleeve. To split camber and caster adjustment, rotate sleeve 45. Save time during alignment, use (Part