FTC5089 GEAR - MAINSHAFT - TRANSFER BOX - 26 TEETH - 1.4 - 1.26 - D1 MANUFACTURER:UTO - USED TAKE-OFF These springs are suitable for

These springs are suitable for the rear of a Defender 110/130 with around 300kg of additional equipment fitted and will provide around 2 inches of lift

253952 bolt (with nut) A-arm to ball bracket

REAR DEFROST

Nominal Voltage: 12V

This will fit the Defender up to vin EA314174 to vin 1A622423 door locks

FTC5089 GEAR - MAINSHAFT - TRANSFER BOX - 26 TEETH - 1.4 - 1.26 - D1 MANUFACTURER:UTO - USED TAKE-OFF These springs are suitable forFTC5089 GEAR MAINSHAFT TRANSFER BOX 26 TEETH 1. 4 1. 26 D1 26 TOOTH LATE MAINSHAFT (INPUT TO TRANSFER BOX) 1: 4 DEFENDER TRANSFER GEAR SET NTO & UTO MAY HAVE BEARING INCLUDED NOTE: THERE ARE TWO VARIANTS OF THE 26 TOOTH GEAR FITTING VARIATIONS 26 tooth FTC5089 (130mm COMMON) 26 tooth FTC4962 (135mm LESS COMMON) Both of the input gears are compatible with all gearsets with the exception of 1. 21 and 0. 9 ratios. The fundamental difference between these