Doepfer A-100BC CV/GATE Bus Cable radial The DP-2 can also be

The DP-2 can also be used for things like punch in/out on Roland/BOSS recording gear

Hypercardioid polar pattern reduces pickup of sounds from the sides and rear

Low frequency instruments -- such as double bass

For each wheel two jumpers are available: one for the voltage range (positive or bipolar) and one for the voltage plateau around 0 V

83") body diameter OUTPUT CONNECTOR Integral 3-pin XLRM-type CABLE 0

Doepfer A-100BC CV/GATE Bus Cable radial The DP-2 can also beDOEPFER A 100BC CV GATE BUS CABLE CV Gate bus connection cable required if the CV and or gate signals of two bus boards have to be connected. For this the CV or gate corresponding connection jumper in the middle of the bus board is removed and replaced by the connector of the A 100BC cable. It is possible to connect the CV and gate lines of two bus boards independently (i. e. only CV or only gate or both). The cable is made of two wires with suitable