Anvil 1-1/4 in. FPT X 1-1/4 in. D FPT Galvanized Malleable Iron Elbow Size:1/4 It is an especially affordable

It is an especially affordable solution with premium features

Up to 80% time savings when compared to traditional barb fittings and no messy PVC glue

Adjustable poles allow for near infinite height adjustment

New O-rings must be lubricated with grease when installed

This ensures your tools and equipment look and perform better over time

Anvil 1-1/4 in. FPT X 1-1/4 in. D FPT Galvanized Malleable Iron Elbow Size:1/4 It is an especially affordableAnvil International offers the broadest line of Malleable Iron Fitting in galvanized finish. Every fitting is manufactured and tested to meet Anvils strict quality standards. All Anvil Class 150 Malleable Iron Fittings conform to ASME B16. 3 and unions conform to ASME B16. 39. All elbows and tees 3 8 inch (10 DN) and larger are 100 percent gas tested at a minimum of 100 PSI (6. 9 bar). Brand Name: Anvil End 1 Diameter: 1 1 4 in. End 1 Type: FPT End 2