Stronghand Adj. Inside/Outside Angle Magnet-156X156X20Mm | Magnetic Positioners Sharp Edge Stem hole: 3/4in Remarks: With

Stem hole: 3/4in Remarks: With flat anvil Mass: 4g

* Must be used for tack welding only and removed before completing weld

creates retrofit tether point

Right Handed Holder Size: 3/8 x 7/8 x 5 Tool Bit Size: 1/4 inch For Lathes of Approx Swing: 10 to 12

- Air Keel

Stronghand Adj. Inside/Outside Angle Magnet-156X156X20Mm | Magnetic Positioners Sharp Edge Stem hole: 3/4in Remarks: WithSHMLA600 Stronghand AdJ. Inside Outside Angle Magnet 156 x 156 x 20mm Inside Outside Angle Magnets Hold stock using the Inside or Outside edges! Hold stock from the outside leaving clearance for inside welds or hold stock from the inside for outside welds. Hold and position sheet metal round pipes square angled or flat stock. The Inside Outside Angle Magnets are constructed from two independent rectangular magnets for consistent undiminished magnetic