LCMF160302-0300-MT CP500 MDT Insert - Medium Turning M20x60 ZP 10.9 rock-hard RustSeal surface that has

rock-hard RustSeal surface that has been in place for months or years – Just lightly sand the surface using 280 to 320 grit sandpaper before applying a thin covering coat of Fusion then topcoat as desired

- Locking "C" clamps are faster and easier to use

Robertson S-2

400mm8770 - 1" dr universal8785 - 1" dr sliding t bar 550mm

Indexing Pry Bar and 16 in

LCMF160302-0300-MT CP500 MDT Insert - Medium Turning M20x60 ZP 10.9 rock-hard RustSeal surface that has3. 0mm MDT MT (Medium Turning) For medium turning For shallow grooving CP500 Universal very tough micrograin grade for all types of threading in most materials. Excellent for stainless steel and difficult operations. (Ti,Al)N + TiN LCMF MDT Insert Basic choice Double ended Economy (cutting edges at both ends) Size 13 For machining in small bore sizes and axial machining at small diameters Size 16 For general machining Size 19 For small part machining