RNMN090300S CBN300 Insert Met M8x70 ZP More effective plunging vs conventional

More effective plunging vs conventional designs

regarding our cutters or the use of a specific tapered end mill

Threads per inch 14

Metal Slitting Saws Used for deep-slotting of Steel and Cast Iron --- also cast Brass and Aluminum and similar hard non-ferrous metals

built-up grime and residue

RNMN090300S CBN300 Insert Met M8x70 ZP More effective plunging vs conventionalCBN300: Brazed layer, Ten Edges (single sided). Composition: 90% cBN content grade with an average grain size of 22 m and a Al ceramic binder. Coating: No coating For medium rough machining of hardened steel (ap = 0,51,0 mm). For finishing and roughing of pearlitic and white chilled cast iron. For finishing of sintered iron. For roughing and finishing of powder metal (iron). Polycrystalline Cubic Boron Nitride (PCBN) is a material which is sintered at